Powertrain Control Module (PCM): Removal
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
- Remove the cowl panel grille. For additional information, refer to FRONT END BODY PANELS article.
- Disconnect the 3 PCM electrical connectors.
- Remove the 2 nuts and the PCM.
NOTE:
PCM installation DOES NOT require new keys or programming of keys.