Component testing procedure
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks Before Any Other Tests | 3 and 2, 3 and 8, 3 and 4, 3 and 10, 1 and 7, 1 and 9 | All window switches, at rest | Open circuit |
| Left front window circuit | 3 and 8, 1 and 7 | Up | Closed circuit |
| 3 and 2, 1 and 7 | Down | Closed circuit | |
| Right front window circuit | 3 and 10, 1 and 9 | Up | Closed circuit |
| 3 and 4, 1 and 9 | Down | Closed circuit |