Component testing procedure
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks Before Any Other Tests | 5 and 3 5 and 4 |
Window switch, at rest | Open circuit |
| Rear window circuit | 5 and 3 | Up | Closed circuit |
| 5 and 4 | Down | Closed circuit |