Component testing procedure
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks before any other tests | 10 and 1, 2, 3, 4, 5, 7, 8, 9 | Rest | Open circuit |
| 6 and 1, 2, 3, 4, 5, 7, 8, 9 | Rest | Closed circuit | |
| Front height circuit | 10 and 1 6 and 7 |
Up | Closed circuit |
| 10 and 7 6 and 1 |
Down | Closed circuit | |
| Rear height circuit | 10 and 4 6 and 5 |
Up | Closed circuit |
| 10 and 5 6 and 4 |
Down | Closed circuit | |
| Forward/rearward circuit | 10 and 8 6 and 9 |
Rearward | Closed circuit |
| 10 and 9 6 and 8 |
Forward | Closed circuit | |
| Backrest circuit | 10 and 3 6 and 2 |
Rearward | Closed circuit |
| 10 and 2 6 and 3 |
Forward | Closed circuit |