LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2010 >> Explorer 4.6 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1364 (Module Configuration System) >> Diagnostic Tests >> Module Configuration >> Principles of Operation >> Definition of Terms >> As-Built Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

As-Built Data

WARNING: This page is about a different car, the 2009 Mercury Mountaineer, 2009 Ford Explorer Sport Trac, and 2009 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

As-Built data is a VIN specific module configuration record. During vehicle build, the configuration from all modules is downloaded and stored in the As-Built database. As-Built data will not reflect customer preference items that have been changed from the default state. These items will need to be changed using programmable parameters after the module is configured.

NOTE: It is not necessary to obtain As-Built data unless directed to do so by the scan tool. This data may be accessed from the technician service publication website.

The following chart lists body/chassis module As-Built data addresses:

BODY/CHASSIS MODULE ADDRESSES FOR AS-BUILT ENTRY

Module Name Module Address
ABS module 760
Accessory protocol interface module (APIM) 7D0
Audio control module (ACM) 727
Driver seat module (DSM) 744
Heating ventilation air conditioning (HVAC) module 733
Instrument cluster (IC) 720
Parking aid module (PAM) 736
Rear entertainment module (RETM) 771
Restraints control module (RCM) 737
Smart junction box (SJB) 726
Satellite digital audio receiver system (SDARS) module 782

The following chart describes specific module programming information:

MODULE CONFIGURATION AND PARAMETER CHART

Module Name Reprogram/ Flash Capable Requires PMI Requires Adaptive Learning Requires Calibration Available Programmable Parameters
ABS module Yes Yes No
  • IVD (stability control) initialization
  • None
Accessory protocol interface module (APIM) Yes Yesa No No
  • Steering wheel controls
  • Stereo in pass-through
Audio control module (ACM) Yes Yes No No
  • SDARS module enable
  • Phone module enable
  • Language (navigation only)
Heating ventilation air conditioning (HVAC) module Yes Yes No No
  • None
Driver seat module (DSM) Yes Yes No No
  • Easy entry/exit
  • Memory pedals
  • Memory recline
Instrument cluster (IC) Yes Yes No No
  • Autolocks
  • Auto-unlock
  • Belt-Minder®
  • Language
  • Oil life threshold
Occupant classification system module (OCSM) Yes No No
  • Seat weight sensor re-zero
  • None
Parking aid module (PAM) - Explorer No No No No
  • None
PAM - Mountaineer, Explorer Sport Trac No Yes No No
  • None
PCM Yes Yes Yes No
  • Speed control enable/disable
  • Axle ratio
  • Tire size
  • 4X4 low range input
Power running board (PRB) module Yes No No No
  • None
Rear entertainment module (RETM) Yes Yes No No
  • Language
  • SDARS module enable
Restraints control module (RCM) Yes Yes No
  • Seat weight sensor re-zero
  • Belt-Minder® (driver) enable
  • Belt-Minder® (passenger) enable
Satellite digital audio receiver system (SDARS) module Yes Yes No No
  • None
Smart junction box (SJB) Yes Yes No
  • Tire pressure monitoring system (TPMS) sensor training
  • Autolocks
  • Auto-unlock
  • Trim switch inhibit
  • Tri-color stoplamps (Sport Trac)
Transmission control module (TCM) Yes No Yes No
  • None
4X4 control module Yes No No No
  • None

a Sync/APIM OASIS application required for programming