Axle Nut

Front Drive Halfshafts (4WD)

Remove and discard the halfshaft nut.
To install, tighten the new nut to 250 Nm (184 lb-ft).

Rear Drive Halfshafts

NOTICE: Install and tighten the new halfshaft nut to specification within 5 minutes of starting it on the threads. Always install a new halfshaft nut after loosening or when not tightening within the specified time or damage to the components may occur.

Install a new halfshaft nut.
Tighten to 275 Nm (203 lb-ft).