Air Conditioning Compressor Module (ACCM)
Air Conditioning Compressor Module (ACCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action to Take |
|---|---|---|
| P0AFA:16 | Hybrid Battery System Voltage Low: Circuit Voltage Below Threshold | Go To PINPOINT TEST D . |
| P0AFB:17 | Hybrid Battery System Voltage High: Circuit Voltage Above Threshold | Go To PINPOINT TEST D . |
| B11EE:19 | A/C Compressor: Current Above Threshold | INSTALL a new electric A/C compressor. REFER to REMOVAL AND INSTALLATION . TEST the system for normal operation. |
| B11EE:49 | A/C Compressor: Internal Electronic Failure | INSTALL a new electric A/C compressor. REFER to REMOVAL AND INSTALLATION . TEST the system for normal operation. |
| B11EE:4B | A/C Compressor: Over Temperature | VERIFY the refrigerant charge level. REFER to SPECIFICATIONS . If the charge level is low, RECHARGE the system, CLEAR the DTCs and REPEAT the self-test. TEST the system for normal operation. If the DTC returns, INSTALL a new electric A/C compressor. REFER to REMOVAL AND INSTALLATION . TEST the system for normal operation. |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | REFER to DTC TABLES to diagnose lost communication with the ECM/PCM "A". |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Module: No Sub Type Information | REFER to DTC TABLES to diagnose lost communication with the IPC module. |
| U0401:68 | Invalid Data Received From ECM/PCM "A": Event Information | This DTC can set due to a fault in the PCM or because the PCM is unable to communicate over the Controller Area Network (CAN) bus. CARRY OUT a self-test of the PCM. If the scan tool indicates that the PCM is not responding, REFER to DTC TABLES to diagnose the network communication concern. If PCM DTCs are present, REFER to INTRODUCTION - HYBRID . |
| U0423:68 | Invalid Data Received From Instrument Panel Cluster Control Module: Event Information | This DTC can set due to a fault in the Instrument Panel Cluster (IPC) or because the IPC is unable to communicate over the CAN bus. CARRY OUT a self-test of the IPC . If the scan tool indicates that the IPC is not responding, REFER to DTC TABLES to diagnose the network communication concern. If IPC DTCs are present, REFER to DTC TABLES to diagnose the IPC system fault |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new electric A/C compressor. REFER to REMOVAL AND INSTALLATION . TEST the system for normal operation. |