| Air Cond Compressor Oil |
Diesel |
w/o Rear AC |
7.00 OZS. |
0.2 L |
PAG 46 |
|
S |
| Air Cond Compressor Oil |
Diesel |
w/Rear A/C |
11.00 OZS. |
0.32 L |
PAG 46 |
|
S |
| Air Cond Refrigerant |
Diesel |
w/Auxiliary Air Cond |
3.38 LBS. |
1.53 KG |
R-134a |
|
S |
| Air Cond Refrigerant |
Diesel |
w/o Auxiliary Air Cond |
2.25 LBS. |
1.02 KG |
R-134a |
|
S |
| Automatic Transmission Fluid |
Trans Mfr CD 5R110W |
TorqShift |
18.80 QTS. |
17.79 L |
MOTORCRAFT Automatic Transmission Fluid MERCON LV |
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range.
Use only Automatic Transmission Fluid MERCON LV. |
S |
| Brake Fluid |
|
|
N/A |
N/A |
MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid |
Fill to line on reservoir. |
S |
| Differential Gear Oil |
|
Dana Conventional Axle Fluid M60 (M248 w/4.10 Axle Ratio |
6.20 PTS. |
2.93 L |
SAE 75W-140 Synthetic Rear Axle Gear Oil |
If the vehicle's rear axle is filled with a synthetic lubricant it is considered lubricated for life. Axle lubricant quantities should not need to be checked unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water.
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Dana Conventional Axle Fluid M60 (M248) |
6.20 PTS. |
2.93 L |
SAE 80W-90 Premium Rear Axle Gear Oil |
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Dana Conventional Axle Fluid M70FF (M267FF) |
6.60 PTS. |
3.12 L |
SAE 80W-90 Premium Rear Axle Gear Oil |
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Dana Limited Slip Axle Fluid M60 (M248) |
5.90 PTS. |
2.79 L |
SAE 90 Hypoid Gear Oil |
Dana limited-slip axle (M60) requires 8 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specifications: EST-M2C118-A.
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Dana Limited Slip Axle Fluid M70FF (M267FF) |
6.60 PTS. |
3.12 L |
SAE 90 Hypoid Gear Oil |
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Limited Slip Axle Fluid M60 (M248) w/4.10 Axle Ratio |
5.90 PTS. |
2.79 L |
SAE 75W-140 Synthetic Rear Axle Gear Oil |
If the vehicle's rear axle is filled with a synthetic lubricant it is considered lubricated for life. Axle lubricant quantities should not need to be checked unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water.
Dana limited-slip axle (M60) requires 8 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specifications: EST-M2C118-A.
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Engine Coolant |
6.0L Eng |
w/Auxiliary Heater |
26.10 QTS. |
24.69 L |
FORD Premium Gold Engine Coolant w/bittering agent |
Add the coolant type originally equipped in the vehicle. |
S |
| Engine Coolant |
6.0L Eng |
w/o Auxiliary Heater |
24.40 QTS. |
23.09 L |
FORD Premium Gold Engine Coolant w/bittering agent |
Add the coolant type originally equipped in the vehicle. |
S |
| Engine Oil |
Diesel |
|
15.00 QTS. |
14.19 L |
SAE 15W-40 Super Duty Motor Oil or SAE 10W-30 Super Duty |
Includes: 1 qt. in engine oil filter. |
S |
| Fuel Tank |
Diesel |
|
35.00 GALS. |
132.48 L |
|
|
S |
| Power Steering Fluid |
|
|
N/A |
N/A |
MOTORCRAFT Automatic Transmission Fluid MERCON V |
|
S |
| Windshield Washer Fluid |
|
|
4.20 QTS. |
3.97 L |
MOTORCRAFT Premium Windshield Washer Concentrate Fluid |
Follow the Manufacturer's Instructions for the mixture ratio. |
S |