Collision Avoidance System DTCS
HEAD UP DISPLAY (HUD) MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| U0104:00 | Lost Communication With Cruise Control Module: No Sub Type Information | Go To PINPOINT TEST B . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC ) Control Module: No Sub Type Information | Go To PINPOINT TEST C . |
| U0405:68 | Invalid Data Received From Cruise Control Module: Event Information | This DTC sets when the Head Up Display (HUD) module receives invalid network data from the Cruise-Control Module (C-CM) with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U0423:68 | Invalid Data Received From Instrument Panel Cluster Control Module: Event Information | This DTC sets when the HUD module receives invalid network data from the Instrument Panel Cluster (IPC). RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U210A:16 | Temperature Sensor: Circuit Voltage Below Threshold | Go To PINPOINT TEST D . |
| U210A:17 | Temperature Sensor: Circuit Voltage Above Threshold | Go To PINPOINT TEST D . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC C3000:41 is retrieved again, INSTALL a new HUD module. REFER to HEAD UP DISPLAY (HUD) MODULE . TEST the system for normal operation. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | Go To PINPOINT TEST E . |
| U3003:1C | Battery Voltage: Circuit Voltage Out of Range | Go To PINPOINT TEST F . |