Tire Pressure Monitoring System (TPMS) DTCS

Tire Pressure Monitoring System (TPMS) DTC Chart

DTC	Description	Action
B106D	Tire Pressure Monitoring System (TPMS) Initiators Not Configured	DTC B106D is only present in a new or reconfigured TPMS /Vehicle Security Module (VSM). Successful programming is the only way to clear this DTC. For information on this DTC and how to clear it, REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .
B106E	Solid State Driver Disabled Due to Short Circuit	GO to PINPOINT TEST D .
B106F	Module Disabled Due to External Fault	GO to PINPOINT TEST D .
B1217	Horn Relay Coil Circuit Failure	GO to PINPOINT TEST D .
B1218	Horn Relay Coil Circuit Short to VBATT	GO to PINPOINT TEST D .
B1317	Battery Voltage High	GO to PINPOINT TEST E .
B1342	ECU is Faulted	INSTALL a new TPMS /VSM . REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .
B1359	Ignition Run/Acc Circuit Failure	GO to PINPOINT TEST F .
B1363	Ignition Start Circuit Failure	GO to PINPOINT TEST F .
B2477	Module Configuration Failure	DTC B2477 is only present in a new or reconfigured TPMS /VSM . Successful module programming is the only way to clear this DTC. For information on this DTC and how to clear it, REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .
B2868	LF Tire Pressure Sensor Fault	DTC B2868 is only present in a new or reconfigured TPMS /VSM . Successful programming is the only way to clear this DTC. For information on this DTC and how to clear it, REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .
B2869	RF Tire Pressure Sensor Fault	DTC B2869 is only present in a new or reconfigured TPMS /VSM . Successful programming is the only way to clear this DTC. For information on this DTC and how to clear it, REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .
B2870	RR Tire Pressure Sensor Fault	DTC B2870 is only present in a new or reconfigured TPMS /VSM . Successful programming is the only way to clear this DTC. For information on this DTC and how to clear it, REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .
B2871	LR Tire Pressure Sensor Fault	DTC B2871 is only present in a new or reconfigured TPMS /VSM . Successful programming is the only way to clear this DTC. For information on this DTC and how to clear it, REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .
B2872	Tire Pressure Sensor Fault	GO to PINPOINT TEST I .
B287A	Tire Pressure System Fault	GO to PINPOINT TEST J .
C2780	ECU in Manufacturing Sub-State	DTC C2780 is only present when a new TPMS /VSM is installed, successful module programming is the only way to clear this DTC. For information on this DTC and how to clear it, REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .
U0155	Lost communication with Instrument Cluster (IC) control module	NOTE: Communications between the TPMS /VSM and the IC has been interrupted for more than 10 seconds when the ignition is in RUN. REFER to MODULE COMMUNICATIONS NETWORK to diagnose the no communication problem.
U2023	Fault Received from External Node	NOTE: RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. CARRY OUT a network test. RETRIEVE and RECORD all Continuous Memory Diagnostic Trouble Codes (CMDTCs). REFER to the Master DTC Chart in MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs.
U2050	No Application Present	CONFIGURE the TPMS /VSM . REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION . CARRY OUT the TPMS /VSM self-test. If DTC U2050 returns, INSTALL a new TPMS /VSM . REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE .