| Air Cond Refrigerant |
|
w/Auxiliary Air Cond |
3.38 LBS. |
1.53 KG |
R-134a |
|
S |
| Air Cond Refrigerant |
|
w/o Auxiliary Air Cond |
1.88 LBS. |
0.85 KG |
R-134a |
|
S |
| Brake Fluid |
|
|
N/A |
N/A |
MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid |
Fill to line on reservoir. |
S |
| Differential Gear Oil |
|
Dana Conventional Axle Fluid M60 (M248 w/4.10 Axle Ratio |
6.20 PTS. |
2.93 L |
SAE 75W-140 Synthetic Rear Axle Gear Oil |
If the vehicle's rear axle is filled with a synthetic lubricant it is considered lubricated for life. Axle lubricant quantities should not need to be checked unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water.
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Dana Conventional Axle Fluid M60 (M248) |
6.20 PTS. |
2.93 L |
SAE 80W-90 Premium Rear Axle Gear Oil |
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Dana Conventional Axle Fluid M70FF (M267FF) |
6.60 PTS. |
3.12 L |
SAE 80W-90 Premium Rear Axle Gear Oil |
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Dana Limited Slip Axle Fluid M60 (M248) |
5.90 PTS. |
2.79 L |
SAE 90 Hypoid Gear Oil |
Dana limited-slip axle (M60) requires 8 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specifications: EST-M2C118-A.
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Dana Limited Slip Axle Fluid M70FF (M267FF) |
6.60 PTS. |
3.12 L |
SAE 90 Hypoid Gear Oil |
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Limited Slip Axle Fluid M60 (M248) w/4.10 Axle Ratio |
5.90 PTS. |
2.79 L |
SAE 75W-140 Synthetic Rear Axle Gear Oil |
If the vehicle's rear axle is filled with a synthetic lubricant it is considered lubricated for life. Axle lubricant quantities should not need to be checked unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water.
Dana limited-slip axle (M60) requires 8 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specifications: EST-M2C118-A.
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Engine Oil |
|
|
6.00 QTS. |
5.67 L |
MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent |
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. |
S |
| Power Steering Fluid |
|
|
N/A |
N/A |
MOTORCRAFT Automatic Transmission Fluid MERCON V |
Keep it in "full" range on dipstick. |
S |
| Windshield Washer Fluid |
|
|
N/A |
N/A |
MOTORCRAFT Premium Windshield Washer Concentrate Fluid |
Follow the Manufacturer's Instructions for the mixture ratio. |
S |