Pinpoint Test
- CHECK THE STARTER MOUNTING
- Inspect the starter mounting bolts for looseness.
- Is the starter motor mounted correctly?
- Yes: GO to step 2 .
- No: INSTALL the starter motor correctly. REFER to Starter Motor - 3.5L Ti-VCT .
- CHECK FOR STARTER NOISE
- Ignition OFF.
- Connect a remote starter switch between the starter solenoid C197A-1 and C197B-1.
- Engage the starter and verify the noise is due to starter operation.
- Is the noise due to the starter engagement?
- Yes: REFER to Starter Motor Drive Gear and Flywheel Ring Gear Inspection .
- No: REFER to SYMPTOM CHART (S) to continue diagnosis .