LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F55 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor System >> Diagnostic Routine(S) >> Diagnostic Routine I >> Pinpoint Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test

  1. ATTEMPT TO TRAIN THE Tire Pressure Monitoring System (TPMS) SENSORS
    NOTE: The Body Control Module (BCM) has a 2-minute time limit between sensor responses. If the Body Control Module (BCM) does not recognize any of the 4 Tire Pressure Monitoring System (TPMS) sensors during this time limit, the horn sounds twice, the message center displays TIRE NOT TRAINED REPEAT, and the entire procedure must be repeated.
    1. TRAIN all 4 Tire Pressure Monitoring System (TPMS) sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training - Intelligent Access (IA)  or REFER to Tire Pressure Monitoring System (TPMS) Sensor Training - Integrated Keyhead Transmitter (IKT) .
    • Do all of the Tire Pressure Monitoring System (TPMS) sensors train? 
    • Yes:  The system is operating correctly at this time. The concern may have been caused by Radio Frequency Interference (RFI).
    • No:  If one or more sensors trained, GO to step 2 . If none of the Tire Pressure Monitoring System (TPMS) sensors trained, REFER to Diagnostic Routine F .
  2. CHECK FOR RADIO FREQUENCY INTERFERENCE
  1. Ignition ON.
  2. Move the vehicle to rotate the wheels at least one-fourth turn.
  3. TRAIN all 4 Tire Pressure Monitoring System (TPMS) sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training - Intelligent Access (IA)  or REFER to Tire Pressure Monitoring System (TPMS) Sensor Training - Integrated Keyhead Transmitter (IKT) .