LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F55 >> Repair and Diagnosis >> Steering >> Steering Column >> Removal And Installation >> Steering Column Shaft >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Shaft: Installation

WARNING: Do not reuse steering column shaft bolts. This may result in fastener failure and steering column shaft detachment or loss of steering control. Failure to follow this instruction may result in serious injury to vehicle occupant(s).
  1. Position the steering column shaft and dash seal, connect the steering column shaft to the steering column and install a new bolt.

    Tighten to 26 Nm (19 lb-ft)  .

  2. Install the 3 dash seal nuts.

    Tighten to 9 Nm (80 lb-in)  .

  3. Position the steering column cover and install the 4 steering column cover screws.
  4. Position the steering column cover trim panel and install the 2 steering column cover trim panel screws.
  5. Connect the steering column shaft to the steering gear and install a new steering column shaft-to-steering gear bolt.
scientia non olet · About LEMON Manuals