Timing Cover

Install the engine front cover bolts. Tighten all of the engine front cover bolts in the sequence shown in 4 stages:
Stage 1: Tighten bolts 1 thru 21 to 10 Nm (89 lb-in).
Stage 2: Tighten bolts 1 thru 20 to 24 Nm (18 lb-ft).
Stage 3: Tighten bolt 21 to 20 Nm (177 lb-in) then an additional 90 degrees.
Stage 4: Tighten bolt 22 to 10 Nm (89 lb-in) then an additional 45 degrees.