Dual Climate Controlled Seat Module (DCSM)

Dual Climate Controlled Seat Module (DCSM)

Removal and Installation

1. When installing a new Dual Climate Controlled Seat Module (DCSM), carry out the appropriate steps in the Programmable Module Installation (PMI) procedure. For additional information, refer to Module Configuration Programmable Module Installation (PMI).

2. Remove the front passenger seat. For additional information, refer to Seat - Front Seat - Front.

3. Disconnect the 3 DCSM electrical connectors.
- Release the 2 locking wedges.

- Disconnect the 3 connectors.





4. Remove the 2 screws and DCSM.

5. To install, reverse the removal procedure.

6. If a new DCSM has been installed, carry out the appropriate steps to complete the Programmable Module Installation (PMI) procedure. For additional information, refer to Module Configuration Programmable Module Installation (PMI).