Wheels And Tires DTCS
TIRE PRESSURE MONITOR (TPM)/VEHICLE SECURITY MODULE (VSM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B106A | TPMS Sensor Pressure Range Bit Incorrect State | Go to PINPOINT TEST D . |
| B106B | Tire Pressure Sensor Low Battery | DTC B106B can be set during TPM /VSM configuration. If DTC B106B was set during configuration, DISREGARD the DTC. If DTC B106B was not set during configuration. Go to PINPOINT TEST D . |
| B106E | Solid State Driver Disabled Due To Short Circuit | Go to PINPOINT TEST E . |
| B106F | Module Disabled Due To External Fault | Go to PINPOINT TEST E . |
| B1217 | Horn Relay Coil Circuit Failure | If the horn sounds continuously, refer to HORN . If the horn does not sound continuously, go to PINPOINT TEST E . |
| B1218 | Horn Relay Coil Circuit Short to VBatt | Go to PINPOINT TEST E . |
| B1317 | Battery Voltage High | Go to PINPOINT TEST F . |
| B1342 | ECU Is Faulted |
NOTE:
If other DTCs are present, REPAIR them before installing a new component. CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved, INSTALL a new module. Refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 4-DOOR SEDAN
or TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 5-DOOR HATCHBACK
in this information. TEST the system for normal operation. |
| B1359 | Ignition Run/Acc Circuit Failure | Go to PINPOINT TEST G . |
| B1363 | Ignition Start Circuit Failure | Go to PINPOINT TEST G . |
| B2477 | Module Configuration Failure | Only present in a new or reconfigured module. To configure the TPM /VSM refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 4-DOOR SEDAN or TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 5-DOOR HATCHBACK in this information. TEST the system for normal operation. |
| B2868 | Left Front Tire Pressure Sensor Fault | Only present in a new or reconfigured module. To configure the TPM /VSM refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 4-DOOR SEDAN or TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 5-DOOR HATCHBACK in this information. TEST the system for normal operation. |
| B2869 | Right Front Tire Pressure Sensor Fault | Only present in a new or reconfigured module. To configure the TPM /VSM refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 4-DOOR SEDAN or TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 5-DOOR HATCHBACK in this information. |
| B2870 | Right Rear Tire Pressure Sensor Fault | Only present in a new or reconfigured module. To configure the TPM /VSM . Refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 4-DOOR SEDAN or TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 5-DOOR HATCHBACK in this information. TEST the system for normal operation. |
| B2871 | Left Rear Tire Pressure Sensor Fault | Only present in a new or reconfigured module. To configure the TPM /VSM . Refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 4-DOOR SEDAN or TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 5-DOOR HATCHBACK in this information. TEST the system for normal operation. |
| B2872 | Tire Pressure Sensor Fault | If DTC B287A is also present, go to PINPOINT TEST K
. Otherwise, go to PINPOINT TEST J . |
| B287A | Tire Pressure System Fault | Go to PINPOINT TEST K . |
| C2780 | ECU in Manufacturer Sub-state | To configure the TPM /VSM refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 4-DOOR SEDAN or TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 5-DOOR HATCHBACK in this information. TEST the system for normal operation. |
| U0155 | Lost Communication With Instrument Panel Cluster | Go to PINPOINT TEST L . |
| U2023 | Fault Received From External Node | RETRIEVE and REPAIR all non-network DTCs in the IPC . Refer to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES . |
| U2050 | No Application Present | CONFIGURE the TPM /VSM . Refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION . CARRY OUT the TPM /VSM self-test. If DTC U2050 returns, INSTALL a new TPM /VSM . Refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 4-DOOR SEDAN or TIRE PRESSURE MONITORING SYSTEM (TPMS) MODULE - 5-DOOR HATCHBACK in this information. Test the system for normal operation. |