Power Trunk / Liftgate Control Module: Service and Repair

Liftgate/Trunk Module (LTM)









Removal and Installation

1. Remove the LH rear quarter trim panel. For additional information, refer to Interior Trim and Ornamentation Quarter Trim Panel.

2. Disconnect the Liftgate/Trunk Module (LTM) electrical connectors.





3. Remove the LTM retaining bolts and remove the LTM.
- To install, tighten to 9 Nm (80 lb-in).





4. To install, reverse the removal procedure.
- Initialize the power liftgate. For additional information, refer to Power Liftgate Initialization Procedures.