Programming the Auto-Unlock Feature Using the IC Message Center
NOTE:
The auto-unlock feature can be activated or deactivated independently of the autolock feature.
NOTE:
The auto-unlock feature of the SJB
can also be configured ON or OFF with the scan tool. For additional information on module configuration, refer to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION
.
- Turn the ignition key from the OFF to the ON position.
- Press and release the SETUP button on the message center switch until AUTOUNLOCK ON> OFF is displayed.
- Press the RESET button to select ON or OFF. If auto-unlock is enabled, the message center will have brackets around the ON> display. If auto-unlock is disabled, the message center will have brackets around the OFF> display.