Steering Angle Sensor Module (SASM) DTC Chart
NOTE:
Refer to Description and Operation, Intelligent Access (IA) with Push Button Start in ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS)
to review the procedures for achieving the various ignition states (ignition in accessory, ignition on, ignition start, ignition off) on vehicles with this feature.
STEERING ANGLE SENSOR MODULE (SASM) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B1317 | Battery Voltage High |
NOTE:
Battery voltage above 16 volts causes DTC B1317 to set. Verify battery and charging system condition prior to diagnosing this DTC. Go to PINPOINT TEST L . |
| B1318 | Battery Voltage Low |
NOTE:
Battery voltage below 10 volts causes DTC B1318 to set. Verify battery and charging system condition prior to diagnosing this DTC. Go to PINPOINT TEST L . |
| B1342 | ECU Is Faulted |
NOTE:
If other DTCs are present, REPAIR them before installing a new component. CLEAR the DTCs. Carry out the Steering Angle Sensor Module (SASM) self-test. RETRIEVE the DTCs. If DTC B1342 is retrieved again, INSTALL a new SASM
. Refer to STEERING ANGLE SENSOR MODULE (SASM) in this information. CLEAR the DTCs. REPEAT the self-test. |
| U0155 | Lost Communication With Instrument Panel Cluster Control Module | REPAIR all other DTCs first. If DTC U0155 is still present, Refer to MODULE COMMUNICATIONS NETWORK to diagnose the High Speed Controller Area Network (HS-CAN) bus. |
| U2050 | No Application Present | CLEAR the DTCs. Carry out the SASM self-test. If DTC U2050 is retrieved again, INSTALL a new SASM . Refer to STEERING ANGLE SENSOR MODULE (SASM) in this information. CLEAR the DTC. REPEAT the self-test. |