Component testing procedure
WARNING: This page is about a different car, the 2011 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 6 and 10 | Left turn | Closed circuit |
| 7 and 10 | Right turn | Closed circuit | |
| Flash-to-pass | 9 and 10 | Pull and hold lever stalk to first detent toward steering wheel | Closed circuit |
| High beam | 8 and 10 9 and 10 |
Pull and hold lever stalk to second detent toward steering wheel | Closed circuit |