Section 1922 (Climate Control System)
WARNING: This page is about a different car, the 2012 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Removal And Installation
- Air Conditioning (A/C) Compressor
- Air Conditioning (A/C) Pressure Relief Valve
- Air Inlet Duct
- Ambient Air Temperature Sensor
- Blower Motor
- Blower Motor Speed Control
- Cabin Air Filter
- Clutch and Clutch Field Coil
- Compressor to Condenser Discharge Line - 3.5L
- Compressor to Condenser Discharge Line - 3.5L GTDI
- Condenser Core - 3.5L
- Condenser Core - 3.5L GTDI
- Evaporator Core
- Heater Core
- Heater Core And Evaporator Core Housing
- Heating Ventilation Air Conditioning (HVAC) Module
- In-Vehicle Temperature Sensor
- Mode Door Actuator - Air Inlet Door
- Mode Door Actuator - Defrost/Panel/Floor Door
- Receiver Drier
- Register - Center
- Register - Driver Side
- Register - Passenger Side
- Temperature Blend Door Actuator - LH
- Temperature Blend Door Actuator - RH
- Thermostatic Expansion Valve
- Thermostatic Expansion Valve Manifold and Tube Assembly