Component testing procedure
ROOF OPENING PANEL CONTROL SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 3 and 12 | Tilt/Open (Push) | Closed circuit |
| 8 and 12 | Tilt/Close (Pull) | Closed circuit | |
| Slide | 6 and 12 | Slide/Open (Push) | Closed circuit |
| 8 and 12 | Slide/Close (Pull) | Closed circuit |