Suspension System - General Information: Specifications
NOTE:
All alignment specifications are with the vehicle fuel tank full.
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Split | Thrust Angle |
|---|---|---|---|---|
| Front | ||||
| Camber | -0.50° ± 0.75° | -0.50° ± 0.75° | 0.00° ± 0.75° | - |
| Caster | 2.50° ± 0.75° | 2.50° ± 0.75° | 0° ± 0.75° | - |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | - | - | 0° ± 0.20 | - |
| Rear | ||||
| Camber | -1.0° ± 1.0° | -1.0° ± 1.0° | - | - |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | 0.18° ± 0.20° | 0.18° ± 0.20° | 0.36° ± 0.20° | - |
| Thrust angle | - | - | - | 0° ± 0.30° |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Ball Joint Deflection | |
| Lower | 0-0.2 mm (0-0.008 in) |
| Front Ride Height | |
| Vehicles without rear stabilizer bar | 7.0 mm (0.275 in) ± 10 mm (0.393 in) |
| Vehicles with rear stabilizer bar and 16-inch wheels | 7.7 mm (0.303 in) ± 10 mm (0.393 in) |
| Vehicles with rear stabilizer bar and 17-inch wheels | 5.4 mm (0.212 in) ± 10 mm (0.393 in) |
| Rear Ride Height | |
| Vehicles without rear stabilizer bar | 47.2 mm (1.858 in) ± 8 mm (0.314 in) |
| Vehicles with rear stabilizer bar and 16-inch wheels | 49.1 mm (1.933 in) ± 8 mm (0.314 in) |
| Vehicles with rear stabilizer bar and 17-inch wheels | 48.3 mm (1.901 in) ± 8 mm (0.314 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | ||
|---|---|---|---|---|
| Rear lower arm adjustment cam nut | 90 | 66 | ||
| Strut rod nut | 90 | 66 | ||
| Subframe forward bolt (1) | - | - | ||
| Subframe rearward bolt(1) | - | - | ||
| Tie-rod end jam nut | 80 | 59 | ||
| Wheel knuckle-to-strut bolt | 150 | 111 | ||
|
||||