- The engine does not crank
|
- Battery
- Fuse(s)
- Starter motor
- Circuitry
- PCM
- Starter motor relay
- Ignition switch
- Start diode
- Transmission Range (TR) sensor - automatic transaxle only
- Clutch cutoff switch - manual transaxle only
- Anti-theft system
|
|
- One-Touch Integrated Start (OTIS) does not operate correctly
|
|
|
|
|
- Starter motor mounting
- Starter motor
- Incorrect starter drive engagement
|
|
|
|
- Battery
- Starter motor
- Circuitry
|
- CARRY OUT the Starter Motor Component Test.
|
- The starter spins but the engine does not crank
|
|
- INSPECT the flywheel/flexplate ring gear for missing teeth. CHECK the starter motor for correct mounting. If concern persists, INSTALL a new starter motor. REFER to STARTER MOTOR
.
|