Information & Entertainment Systems DTCS
AUDIO CONTROL MODULE (ACM) - FUSION, MILAN WITHOUT NAVIGATION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1031 | SDARS Satellite Antenna Open | GO to PINPOINT TEST B . |
| B1032 | SDARS Satellite Antenna Short | GO to PINPOINT TEST B . |
| B1117 | Audio Steering Wheel Button Stuck | GO to PINPOINT TEST Q . |
| B1318 | Battery Voltage Low | GO to PINPOINT TEST AO . |
| B1342 | ECU is Faulted |
NOTE:
DTC B1342 may set as a result of a speaker circuit fault. In this case, DTC B2965 should also be set. Be sure to repair the speaker circuit fault before diagnosing DTC B1342. CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is the only DTC retrieved again, INSTALL a new Audio Control Module (ACM). REFER to AUDIO CONTROL MODULE (ACM) - FUSION, MILAN
or AUDIO CONTROL MODULE (ACM) - MKZ
in this service information. TEST the system for normal operation. |
| B2103 | Antenna Not Connected | GO to PINPOINT TEST A . |
| B2404 | Audio Steering Wheel Switch Circuit Fault | GO to PINPOINT TEST Q . |
| B2406 | Audio Disc CD Player Internal Fault |
NOTE:
DTC B1342 may also be set. CLEAR the DTCs. REPEAT the self-test. If DTC B2406 is retrieved again, INSTALL a new ACM. REFER to AUDIO CONTROL MODULE (ACM) - FUSION, MILAN
or AUDIO CONTROL MODULE (ACM) - MKZ
in this service information. TEST the system for normal operation. |
| B2477 | Module Configuration Failure | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| B2965 | Audio System Speaker Circuit Fault | For the base or mid-level audio system, GO to PINPOINT TEST C . For Sony® sound, GO to PINPOINT TEST E . |
| U0140 | Lost Communication With Body Control Module (GEM) | GO to PINPOINT TEST AE . |
| U0155 | Lost Communication With Instrument Panel Cluster (IC) Control Module | GO to PINPOINT TEST AG . |
| U0159 | Lost Communication With Parking Assist Control Module (PAM) | GO to PINPOINT TEST U . |
| U0197 | Lost Communication With Telephone Control Module | GO to PINPOINT TEST AK . |
| U0238 | Lost Communication With Digital Audio Control Module "D" (DSP) | GO to PINPOINT TEST AL . |
| U0255 | Lost Communication With Front Controls Interface Module | GO to PINPOINT TEST AM . |
| U0256 | Lost Communication With Front Display Interface Module | GO to PINPOINT TEST AN . |
| U2050 | No Application Present | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2051 | One or More Calibration Files Missing/Corrupt | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
AUDIO CONTROL MODULE (ACM) - MKZ WITHOUT NAVIGATION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B11BA:1C | Steering Wheel Audio Switch Pack: Circuit Voltage out of Range | GO to PINPOINT TEST Q . |
| B11BA:63 | Steering Wheel Audio Switch Pack: Circuit/Component Protection Time-Out | GO to PINPOINT TEST Q . |
| B1A01:01 | Speaker #1: General Electrical Failure | For premium sound, GO to PINPOINT TEST D . For THX® sound, GO to PINPOINT TEST F . |
| B1A01:11 | Speaker #1: Circuit Short to Ground | For premium sound, GO to PINPOINT TEST D . For THX® sound, GO to PINPOINT TEST F . |
| B1A01:12 | Speaker #1: Circuit Short to Battery | For premium sound, GO to PINPOINT TEST D . For THX® sound, GO to PINPOINT TEST F . |
| B1A01:13 | Speaker #1: Circuit Open | For premium sound, GO to PINPOINT TEST D . For THX® sound, GO to PINPOINT TEST F . |
| B1A02:01 | Speaker #2: General Electrical Failure | For premium sound, GO to PINPOINT TEST D . For THX® sound, GO to PINPOINT TEST F . |
| B1A02:11 | Speaker #2: Circuit Short to Ground | For premium sound, GO to PINPOINT TEST D . For THX® sound, GO to PINPOINT TEST F . |
| B1A02:12 | Speaker #2: Circuit Short to Battery | For premium sound, GO to PINPOINT TEST D . For THX® sound, GO to PINPOINT TEST F . |
| B1A02:13 | Speaker #2: Circuit Open | For premium sound, GO to PINPOINT TEST D . For THX® sound, GO to PINPOINT TEST F . |
| B1A03:01 | Speaker #3: General Electrical Failure | GO to PINPOINT TEST D . |
| B1A03:11 | Speaker #3: Circuit Short to Ground | GO to PINPOINT TEST D . |
| B1A03:12 | Speaker #3: Circuit Short to Battery | GO to PINPOINT TEST D . |
| B1A03:13 | Speaker #3: Circuit Open | GO to PINPOINT TEST D . |
| B1A04:01 | Speaker #4: General Electrical Failure | GO to PINPOINT TEST D . |
| B1A04:11 | Speaker #4: Circuit Short to Ground | GO to PINPOINT TEST D . |
| B1A04:12 | Speaker #4: Circuit Short to Battery | GO to PINPOINT TEST D . |
| B1A04:13 | Speaker #4: Circuit Open | GO to PINPOINT TEST D . |
| B1A05:02 | Speaker #5: General Signal Failure | GO to PINPOINT TEST D . |
| B1A06:02 | Speaker #6: General Signal Failure | GO to PINPOINT TEST D . |
| B1A56:21 | Antenna: Signal Amplitude □ Minimum | GO to PINPOINT TEST A . |
| B1A89:01 | Satellite Antenna: General Electrical Failure | GO to PINPOINT TEST B . |
| B1A89:13 | Satellite Antenna: Circuit Open | GO to PINPOINT TEST B . |
| B1D19:49 | Compact Disc Unit: Internal Electronic Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B1D19:49 is retrieved again, INSTALL a new Audio Control Module (ACM). REFER to AUDIO CONTROL MODULE (ACM) - MKZ in this service information. REPEAT the self-test. |
| B1D78:13 | Auxiliary Input: Circuit Open | GO to PINPOINT TEST R . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AE . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST AG . |
| U0159:00 | Lost Communication With Parking Assist Control Module "A": No Sub Type Information | GO to PINPOINT TEST U . |
| U0197:00 | Lost Communication With Telephone Control Module: No Sub Type Information | GO to PINPOINT TEST AK . |
| U0238:00 | Lost Communication With Digital Audio Control Module "D": No Sub Type Information | GO to PINPOINT TEST AL . |
| U0255:00 | Lost Communication With Front Display Interface Module: No Sub Type Information | GO to PINPOINT TEST AN . |
| U0256:00 | Lost Communication With Front Controls Interface Module: No Sub Type Information | GO to PINPOINT TEST AM . |
| U2014:41 | Control Module Hardware: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:41 is retrieved again, INSTALL a new ACM. REFER to AUDIO CONTROL MODULE (ACM) - MKZ in this service information. REPEAT the self-test. |
| U2014:42 | Control Module Hardware: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:42 is retrieved again, INSTALL a new ACM. REFER to AUDIO CONTROL MODULE (ACM) - MKZ in this service information. REPEAT the self-test. |
| U2014:96 | Control Module Hardware: Component Internal Failure | GO to PINPOINT TEST I . |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AO . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AP . |
AUDIO CONTROL MODULE (ACM) - NAVIGATION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B119F:01 | GPS Antenna: General Electrical Failure | GO to PINPOINT TEST W . |
| B119F:13 | GPS Antenna: Circuit Open | GO to PINPOINT TEST W . |
| B11BA:1C | Steering Wheel Audio Switch Pack: Circuit Voltage out of Range | GO to PINPOINT TEST Q . |
| B11BA:63 | Steering Wheel Audio Switch Pack: Circuit/Component Protection Time-Out | GO to PINPOINT TEST Q . |
| B1201:1C | Steering Wheel Audio Switch Pack 2: Circuit Voltage out of Range | GO to PINPOINT TEST Q . |
| B1201:63 | Steering Wheel Audio Switch Pack 2: Circuit/Component Protection Time-Out | GO to PINPOINT TEST Q . |
| B121C:01 | Hard Drive: General Electrical Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B121C:01 is retrieved again, INSTALL a new Audio Control Module (ACM). REFER to AUDIO CONTROL MODULE (ACM) - FUSION, MILAN or AUDIO CONTROL MODULE (ACM) - MKZ in this service information. REPEAT the self-test. |
| B1A01:01 | Speaker #1: General Electrical Failure | For premium sound, GO to PINPOINT TEST D . For Sony® sound, GO to PINPOINT TEST E . For THX® sound, GO to PINPOINT TEST F . |
| B1A02:01 | Speaker #2: General Electrical Failure | For premium sound, GO to PINPOINT TEST D . For Sony® sound, GO to PINPOINT TEST E . For THX® sound, GO to PINPOINT TEST F . |
| B1A03:01 | Speaker #3: General Electrical Failure | For premium sound, GO to PINPOINT TEST D . For Sony® sound, GO to PINPOINT TEST E . For THX® sound, GO to PINPOINT TEST F . |
| B1A04:01 | Speaker #4: General Electrical Failure | For premium sound, GO to PINPOINT TEST D . For Sony® sound, GO to PINPOINT TEST E . For THX® sound, GO to PINPOINT TEST F . |
| B1A05:01 | Speaker #5: General Electrical Failure | For premium sound, GO to PINPOINT TEST D . For Sony® sound, GO to PINPOINT TEST E . For THX® sound, GO to PINPOINT TEST F . |
| B1A06:01 | Speaker #6: General Electrical Failure | For premium sound, GO to PINPOINT TEST D . For Sony® sound, GO to PINPOINT TEST E . For THX® sound, GO to PINPOINT TEST F . |
| B1A07:01 | Speaker #7: General Electrical Failure | GO to PINPOINT TEST Y . |
| B1A56:21 | Antenna: Signal Amplitude □ Minimum | GO to PINPOINT TEST A . |
| B1A89:01 | Satellite Antenna: General Electrical Failure | GO to PINPOINT TEST B . |
| B1A89:13 | Satellite Antenna: Circuit Open | GO to PINPOINT TEST B . |
| B1D19:49 | Compact Disc Unit: Internal Electronic Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B1D19:49 is retrieved again, INSTALL a new Audio Control Module (ACM). REFER to AUDIO CONTROL MODULE (ACM) - FUSION, MILAN or AUDIO CONTROL MODULE (ACM) - MKZ in this service information. REPEAT the self-test. |
| B1D19:4B | Compact Disc Unit: Over Temperature | The ACM was over-temperature. This may occur during extended use. Audio operation can resume after the ACM cools. CLEAR the DTCs. This is normal operation. |
| B1D79:01 | Microphone Input: General Electrical Failure | GO to PINPOINT TEST V . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AE . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST AG . |
| U0159:00 | Lost Communication With Parking Assist Control Module "A": No Sub Type Information | GO to PINPOINT TEST U . |
| U0162:00 | Lost Communication With Navigation Display Module: No Sub Type Information | GO to PINPOINT TEST M . |
| U0164:00 | Lost Communication With HVAC Control Module: No Sub Type Information | GO to PINPOINT TEST AH . |
| U0197:00 | Lost Communication With Telephone Control Module: No Sub Type Information | GO to PINPOINT TEST AK . |
| U0238:00 | Lost Communication With Digital Audio Control Module "D": No Sub Type Information | GO to PINPOINT TEST AL . |
| U0256:00 | Lost Communication With Front Controls Interface Module: No Sub Type Information | GO to PINPOINT TEST AM . |
| U2014:09 | Control Module Hardware: Component Failure | GO to PINPOINT TEST X . |
| U2014:41 | Control Module Hardware: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:41 is retrieved again, INSTALL a new ACM. REFER to AUDIO CONTROL MODULE (ACM) - FUSION, MILAN or AUDIO CONTROL MODULE (ACM) - MKZ in this service information. REPEAT the self-test. |
| U2014:96 | Control Module Hardware: Component Internal Failure | GO to PINPOINT TEST I . |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AO . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AP . |
AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE - SONY® SOUND DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1A01:01 | Speaker #1: General Electrical Failure | GO to PINPOINT TEST E . |
| B1A01:11 | Speaker #1: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A01:12 | Speaker #1: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A01:13 | Speaker #1: Circuit Open | GO to PINPOINT TEST E . |
| B1A02:01 | Speaker #2: General Electrical Failure | GO to PINPOINT TEST E . |
| B1A02:11 | Speaker #2: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A02:12 | Speaker #2: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A02:13 | Speaker #2: Circuit Open | GO to PINPOINT TEST E . |
| B1A03:01 | Speaker #3: General Electrical Failure | GO to PINPOINT TEST E . |
| B1A03:11 | Speaker #3: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A03:12 | Speaker #3: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A03:13 | Speaker #3: Circuit Open | GO to PINPOINT TEST E . |
| B1A04:01 | Speaker #4: General Electrical Failure | GO to PINPOINT TEST E . |
| B1A04:11 | Speaker #4: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A04:12 | Speaker #4: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A04:13 | Speaker #4: Circuit Open | GO to PINPOINT TEST E . |
| B1A05:01 | Speaker #5: General Electrical Failure | GO to PINPOINT TEST E . |
| B1A05:11 | Speaker #5: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A05:12 | Speaker #5: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A05:13 | Speaker #5: Circuit Open | GO to PINPOINT TEST E . |
| B1A06:01 | Speaker #6: General Electrical Failure | GO to PINPOINT TEST E . |
| B1A06:11 | Speaker #6: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A06:12 | Speaker #6: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A06:13 | Speaker #6: Circuit Open | GO to PINPOINT TEST E . |
| B1A07:01 | Speaker #7: General Electrical Failure | GO to PINPOINT TEST E . |
| B1A07:11 | Speaker #7: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A07:12 | Speaker #7: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A07:13 | Speaker #7: Circuit Open | GO to PINPOINT TEST E . |
| B1A08:01 | Speaker #8: General Electrical Failure | GO to PINPOINT TEST E . |
| B1A08:11 | Speaker #8: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A08:12 | Speaker #8: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A08:13 | Speaker #8: Circuit Open | GO to PINPOINT TEST E . |
| B1A09:02 | Speaker #9: General Signal Failure | GO to PINPOINT TEST E . |
| B1A09:12 | Speaker #9: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A09:13 | Speaker #9: Circuit Open | GO to PINPOINT TEST E . |
| B1A10:11 | Speaker #10: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B1A10:12 | Speaker #10: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B1A10:13 | Speaker #10: Circuit Open | GO to PINPOINT TEST E . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AE . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST AG . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to PINPOINT TEST AJ . |
| U0197:00 | Lost Communication With Telephone Control Module: No Sub Type Information | GO to PINPOINT TEST AK . |
| U2014:01 | Control Module Hardware: General Electrical Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:01 is retrieved again, INSTALL a new audio Digital Signal Processing (DSP) module. REFER to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE in this service information. REPEAT the self-test. |
| U2014:41 | Control Module Hardware: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:41 is retrieved again, INSTALL a new audio Digital Signal Processing (DSP) module. REFER to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE in this service information. REPEAT the self-test. |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AS . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AT . |
AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE - THX® SOUND DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1A01:11 | Speaker #1: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A01:12 | Speaker #1: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A01:13 | Speaker #1: Circuit Open | GO to PINPOINT TEST F . |
| B1A02:11 | Speaker #2: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A02:12 | Speaker #2: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A02:13 | Speaker #2: Circuit Open | GO to PINPOINT TEST F . |
| B1A03:11 | Speaker #3: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A03:12 | Speaker #3: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A03:13 | Speaker #3: Circuit Open | GO to PINPOINT TEST F . |
| B1A04:11 | Speaker #4: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A04:12 | Speaker #4: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A04:13 | Speaker #4: Circuit Open | GO to PINPOINT TEST F . |
| B1A05:11 | Speaker #5: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A05:12 | Speaker #5: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A05:13 | Speaker #5: Circuit Open | GO to PINPOINT TEST F . |
| B1A06:11 | Speaker #6: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A06:12 | Speaker #6: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A06:13 | Speaker #6: Circuit Open | GO to PINPOINT TEST F . |
| B1A07:11 | Speaker #7: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A07:12 | Speaker #7: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A07:13 | Speaker #7: Circuit Open | GO to PINPOINT TEST F . |
| B1A08:11 | Speaker #8: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A08:12 | Speaker #8: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A08:13 | Speaker #8: Circuit Open | GO to PINPOINT TEST F . |
| B1A09:11 | Speaker #9: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A09:12 | Speaker #9: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A09:13 | Speaker #9: Circuit Open | GO to PINPOINT TEST F . |
| B1A10:11 | Speaker #10: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A10:12 | Speaker #10: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A10:13 | Speaker #10: Circuit Open | GO to PINPOINT TEST F . |
| B1A11:11 | Speaker #11: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A11:12 | Speaker #11: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A11:13 | Speaker #11: Circuit Open | GO to PINPOINT TEST F . |
| B1A12:11 | Speaker #12: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B1A12:12 | Speaker #12: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B1A12:13 | Speaker #12: Circuit Open | GO to PINPOINT TEST F . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AE . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST AG . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to PINPOINT TEST AJ . |
| U0197:00 | Lost Communication With Telephone Control Module: No Sub Type Information | GO to PINPOINT TEST AK . |
| U2014:41 | Control Module Hardware: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:41 is retrieved again, INSTALL a new audio Digital Signal Processing (DSP) module. REFER to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE in this service information. REPEAT the self-test. |
| U2014:42 | Control Module Hardware: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:42 is retrieved again, INSTALL a new audio DSP module. REFER to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE in this service information. REPEAT the self-test. |
| U2014:4B | Control Module Hardware: Over Temperature | The audio DSP module was over-temperature. This may occur during extended use. Audio operation can resume after the audio DSP module cools. CLEAR the DTCs. This is normal operation. |
| U2014:96 | Control Module Hardware: Component Internal Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:96 is retrieved again, INSTALL a new audio DSP module. REFER to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE in this service information. REPEAT the self-test. |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AS . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AT . |
ACCESSORY PROTOCOL INTERFACE MODULE (APIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1201:1C | Steering Wheel Audio Switch Pack 2: Circuit Voltage Out of Range | GO to PINPOINT TEST Q . |
| B1201:63 | Steering Wheel Audio Switch Pack 2: Circuit/Component Protection Time-Out | GO to PINPOINT TEST Q . |
| B1252:04 | USB Port: System Internal Failure | GO to PINPOINT TEST AB . |
| B1252:11 | USB Port: Circuit Short to Ground | GO to PINPOINT TEST AB . |
| B1A16:01 | Microphone Input Circuit: General Electrical Failure | GO to PINPOINT TEST V . |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | GO to PINPOINT TEST AD . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AE . |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to PINPOINT TEST AF . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST AG . |
| U016A:00 | Lost Communication With Global Positioning System Module: No Sub Type Information | GO to PINPOINT TEST AI . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to PINPOINT TEST AJ . |
| U0255:00 | Lost Communication With Front Display Interface Module: No Sub Type Information | GO to PINPOINT TEST AN . |
| U0256:00 | Lost Communication With Front Controls Interface Module: No Sub Type Information | GO to PINPOINT TEST AM . |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the Accessory Protocol Interface Module (APIM) or Smart Junction Box (SJB). |
| U0423:00 | Invalid Data Received From Instrument Panel Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Instrument Panel Cluster (IPC). |
| U046B:00 | Invalid Data Received From Global Positioning System Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Global Positioning System Module (GPSM). |
| U0485:00 | Invalid Data Received From Radio: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Audio Control Module (ACM). |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2101:00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U3000:04 | Control Module: System Internal Failure | GO to PINPOINT TEST Z . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new APIM. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) in this service information. REPEAT the self-test. |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new APIM. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) . REPEAT the self-test. |
| U3000:88 | Control Module: Bus Off | REFER to MODULE COMMUNICATIONS NETWORK -- FUSION, MILAN & MKZ article. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AQ . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AR . |
FRONT CONTROLS INTERFACE MODULE (FCIM) - FUSION, MILAN WITHOUT NAVIGATION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1318 | Battery Voltage Low | GO to PINPOINT TEST AU . |
| B1342 | ECU is Faulted | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) - FUSION, MILAN in this service information. REPEAT the self-test. |
| B2924 | Audio Button Stuck | GO to PINPOINT TEST J . |
| U0140 | Lost Communication With Body Control Module (GEM) | GO to PINPOINT TEST AE . |
| U0164 | Lost Communication With HVAC Control Module (EATC) | GO to PINPOINT TEST AH . |
| U0184 | Lost Communication With Radio (ACM) | GO to PINPOINT TEST AJ . |
| U2050 | No Application Present | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2051 | One or More Calibration Files Missing/Corrupt | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
FRONT CONTROLS INTERFACE MODULE (FCIM) - MKZ WITHOUT NAVIGATION, ALL VEHICLES WITH NAVIGATION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AE . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to PINPOINT TEST AJ . |
| U2013:63 | Switch Pack: Circuit/Component Protection Time-Out | GO to PINPOINT TEST J . |
| U2014:41 | Control Module Hardware: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:41 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) - MKZ in this service information. REPEAT the self-test. |
| U2014:42 | Control Module Hardware: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:42 is still present, INSTALL a new FCIM. REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) - MKZ in this service information. REPEAT the self-test. |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AU . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AV . |
FRONT DISPLAY INTERFACE MODULE (FDIM) - VEHICLES WITHOUT NAVIGATION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1318 | Battery Voltage Low | GO to PINPOINT TEST AW . |
| B1342 | ECU is Faulted | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is still present, INSTALL a new Front Display Interface Module (FDIM). REFER to FRONT DISPLAY INTERFACE MODULE (FDIM) - FUSION, MILAN or FRONT DISPLAY INTERFACE MODULE (FDIM) - MKZ in this service information. REPEAT the self-test. |
| B2477 | Module Configuration Failure | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| B2924 | Audio Button Stuck | GO to PINPOINT TEST AZ . |
| U0140 | Lost Communication With Body Control Module (GEM) | GO to PINPOINT TEST AE . |
| U0155 | Lost Communication With Instrument Panel Cluster (IC) Control Module | GO to PINPOINT TEST AG . |
| U0164 | Lost Communication With HVAC Control Module (EATC) | GO to PINPOINT TEST AH . |
| U0184 | Lost Communication With Radio (ACM) | GO to PINPOINT TEST AJ . |
| U0197 | Lost Communication With Telephone Control Module | GO to PINPOINT TEST AK . |
| U0238 | Lost Communication With Digital Audio Control Module "D" (DSP) | GO to PINPOINT TEST AL . |
| U2050 | No Application Present | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
| U2051 | One or More Calibration Files Missing/Corrupt | REFER to MODULE CONFIGURATION -- FUSION MILAN & MKZ article. |
GLOBAL POSITIONING SYSTEM MODULE (GPSM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AE . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST AG . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to PINPOINT TEST AJ . |
| U0197:00 | Lost Communication With Telephone Control Module: No Sub Type Information | GO to PINPOINT TEST AK . |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW diagnostics for other DTCs present in the Global Positioning System Module (GPSM) and Restraints Control Module (RCM). |
| U0423:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW diagnostics for other DTCs present in the GPSM and Instrument Panel Cluster (IPC). |
| U3000:09 | Control Module: Component Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:09 is still present, INSTALL a new GPSM. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM) - FUSION, MILAN or GLOBAL POSITIONING SYSTEM MODULE (GPSM) - MKZ in this service information. REPEAT the self-test. |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new GPSM. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM) - FUSION, MILAN or GLOBAL POSITIONING SYSTEM MODULE (GPSM) - MKZ in this service information. REPEAT the self-test. |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new GPSM. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM) - FUSION, MILAN or GLOBAL POSITIONING SYSTEM MODULE (GPSM) - MKZ in this service information. REPEAT the self-test. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AX . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AY . |