Post Crash Alert Function

The post crash alert is a function controlled by the SJB  . If the Restraints Control Module (RCM) determines an impact of enough severity (the air bags may or may not be deployed), the RCM  sends a message to the SJB  over the High Speed Controller Area Network (HS-CAN) and the post crash alert function is activated. The post-crash alert function activates the hazard lamp function and cycles the horn on 3 times, then off for 4 seconds, and repeats this cycle until the battery is discharged or the function is turned off. The post crash alert function can be turned off by:

• pressing the hazard flasher lamp switch (which may need to be pressed more than once).
• pressing the RKE  transmitter UNLOCK button.
• pressing the RKE  transmitter PANIC button.