LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic System >> Diagnosis And Testing >> Anti-Lock Control >> Symptom Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Symptom Chart

SYMPTOM CHART

Condition Possible Sources Action
  • No communication with the ABS module
  • Fuse
  • Wiring, terminals or connectors
  • ABS module concern
  • The red brake warning indicator is always/never on
  • Instrument Panel Cluster (IPC) concern
  • ABS concern
  • The yellow ABS warning indicator is always/never on
  • Instrument Panel Cluster (IPC) concern
  • ABS module
  • The stability/traction control indicator (sliding car icon) is never/always on
  • IPC 
  • ABS concern
  • ABS false activation, ABS too sensitive, ABS activates on normal stop
  • Front/rear suspension concern
  • ELIMINATE the front/rear suspension as the cause of the problem. REFER to FRONT SUSPENSION article (front suspension) or REAR SUSPENSION article (rear suspension).
  • Parking brake shoes out of adjustment (dragging)
  • The traction control system cannot be disabled
  • Wiring, terminals, or connectors
  • Stability/traction control switch
  • ABS module
  • If a MyKey® restricted key is in use with the AdvanceTrac® always-on feature configured to on, the traction control system cannot be disabled. An admin key must be used in order to enable and disable the traction control system
  • The stability/traction control indicator (sliding car icon) is flashing at all times
    NOTE: It is normal for the indicator to flash during a traction control event.
  • ABS module not calibrated