Inspection and Verification
This service information provides step-by-step module configuration procedures. Carry out Programmable Module Installation (PMI) when another article directs to carry out configuration or when DTCs from the chart are present.
DTC CHART
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| B2477 | Module Configuration Failure |
|
INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| P0602 | Powertrain Control Module Programming Error |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P0605 | Internal Control Module Read Only Memory (ROM) Error | PCM |
|
| P1639 | Vehicle ID Block Corrupted, Not Programmed |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U0300 | Internal Control Module Software Incompatibility |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U0301 | Software Incompatibility with Engine/Powertrain Control Module |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2050 | No Application Present |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2050 | No Application Present |
|
INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| U2051 | One or More Calibration Files Missing / Corrupt |
|
INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |