Speech Recognition Module (SRM)
SPEECH RECOGNITION MODULE (SRM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1D79:11 | Microphone Input: Circuit Short to Ground | Go to PINPOINT TEST E . |
| B1D79:12 | Microphone Input: Circuit Short to Battery | Go to PINPOINT TEST E . |
| B1D79:13 | Microphone Input: Circuit Open | Go to PINPOINT TEST E . |
| B1D79:1E | Microphone Input: Circuit Resistance Out of Range | Go to PINPOINT TEST E . |
| U0010:88 | Medium Speed CAN Communication Bus: Bus Off | MODULE COMMUNICATIONS NETWORK . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION . |
| U3000:41 | Control Module: General Checksum Error | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new Speech Recognition Module (SRM). REFER to SPEECH RECOGNITION MODULE (SRM) in this service information. REPEAT the self-test. |
| U3000:44 | Control Module: Data Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:44 is still present, INSTALL a new SRM . REFER to SPEECH RECOGNITION MODULE (SRM) in this service information. REPEAT the self-test. |
| U3000:45 | Control Module: Program Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:45 is still present, INSTALL a new SRM . REFER to SPEECH RECOGNITION MODULE (SRM) in this service information. REPEAT the self-test. |
| U3000:46 | Control Module: Calibration Parameter Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:46 is still present, INSTALL a new SRM . REFER to SPEECH RECOGNITION MODULE (SRM) in this service information. REPEAT the self-test. |
| U3000:51 | Control Module: Not Programmed | REFER to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION article. |