Component testing procedure
MULTIFUNCTION SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 6 and 10 | Left turn | Closed circuit |
| 7 and 10 | Right turn | Closed circuit | |
| Flash-to-pass | 9 and 10 | Pull and hold lever stalk to first detent toward steering wheel | Closed circuit |
| High beam | 8 and 10 9 and 10 |
Pull and hold lever stalk to second detent toward steering wheel | Closed circuit |