Differential Specifications

Limited Slip Axle *, **
M60 (M248) E350 with 4.10 axle ratio 5.9 pints (2.8 L)

Dana Limited Slip Axle *, **
M60 (M248) E250/E350 5.9 pints (2.8 L)

Dana Limited Slip Axle **
M70FF (M267FF) E350 6.6 pints (3.1 L)

Dana Limited Slip Axle **
M70HD (M273HD) E450 9.0 pints (4.3 L)

Dana Conventional Axle **
M60 (M248) E350 with 4.10 axle ratio 6.2 pints (2.9 L)

Dana Conventional Axle **
M60 (M248) E150/E350 6.2 pints (2.9 L)

Dana Conventional Axle **
M70FF (M267FF) E350 6.6 pints (3.1 L)

Dana Conventional Axle **
M70HD (M273HD) E450 9.0 pints (4.3 L)

* Note: Dana limited-slip axle (M60) requires 6 oz. (177 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A.

** Note: Fill Dana rear axles to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.