Powertrain Control Module (PCM): Removal
- If servicing the PCM, connect the scan tool to the vehicle. Allow the scan tool to identify the vehicle and obtain configuration data.
- All programmable module information will automatically be retrieved by the VCM.
- Remove the Air Cleaner (ACL) assembly and ACL outlet tube. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
- Disconnect the 3 PCM electrical connectors.
- Remove the 2 retaining nuts and PCM.
NOTE:
Refer to the
INTRODUCTION - GASOLINE MODELS
for correct Vehicle Communication Module (VCM) hook-up procedure.