Powertrain Control Module (PCM) - 2.0L GTDI: Removal

Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .
Disconnect the 2 PCM electrical connectors.
- Detach the wiring harness retainer from the cowl.
  
  Fig 1: Locating PCM Electrical Connectors
  Courtesy of FORD MOTOR CO.
Remove the 2 nuts and the PCM and bracket assembly.

Fig 2: Locating PCM And Bracket Assembly Nuts
Courtesy of FORD MOTOR CO.
Remove the 3 bolts and remove the PCM from the bracket.

Fig 3: Locating Bolts On PCM Bracket
Courtesy of FORD MOTOR CO.