Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 2 and 6 | Tilt open (push) | Closed circuit |
| 2 and 6 | Tilt close (pull) | Closed circuit | |
| Open | 2 and 4 | Tilt open (push) | Closed circuit |
| 2 and 4 | Slide open (push) | Closed circuit | |
| Close | 2 and 3 | Tilt close (pull) | Closed circuit |
| 2 and 3 | Slide close (pull) | Closed circuit |