Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to Test | Connect self-powered test light or ohm-meter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Headlamp Circuit | 7 and 10 | Off | Open circuit |
| Park | Open circuit | ||
| Low | Open circuit | ||
| Auto | Open circuit | ||
| Autolamp Circuit | 7 and 4 | Off | Open circuit |
| Park | Open circuit | ||
| Low | Open circuit | ||
| Auto | Closed circuit | ||
| Parking Lamps | 7 and 5 | off | Open circuit |
| Park | Closed circuit | ||
| Low | Open circuit | ||
| Auto | Open circuit | ||
| Fog Lamps | 7 and 6 | Off | Open circuit |
| Fog | Closed circuit |