Auto-Unlock Programming Using the Power Door Unlock/Lock Procedure
NOTE:
The auto-unlock feature is not available on vehicles equipped with a manual transmission.
NOTE:
The auto-unlock feature can be activated/deactivated independently of the autolock feature.
- Close all the doors, the liftgate and the liftgate glass.
- Confirm that the ignition is in the OFF position.
- Turn the ignition from OFF to ON.
- Press the door lock control switch UNLOCK button 3 times.
- Turn the ignition from ON to OFF.
- Press the door lock control switch UNLOCK button 3 times.
- Turn the ignition from OFF to ON. The horn will chirp once to indicate the system is in the enable/disable mode.
- Press the door lock control switch LOCK button once, then the UNLOCK button once to toggle the auto-unlock feature ON/OFF. The horn will chirp once to indicate auto-unlock is disabled. If the horn chirps twice (one short and one long chirp), the auto-unlock feature has been enabled.
- Turn the ignition to the OFF position to exit the enable/disable mode. The horn will chirp once to indicate the procedure is complete.
NOTE:
Prior to beginning this procedure, make sure that the anti-theft system is not armed, the ignition is in the OFF position, and all the vehicle doors, liftgate and liftgate glass are closed.