Escape & Escape Hybrid
COMMUNICATION NETWORK DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| U0001 | High Speed CAN Communication Bus | ABS module | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U0001:88 | High Speed CAN Communication Bus: Bus Off | ABS module | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U0028:08 | Vehicle Communication Bus A: Bus Signal/Message Failures | Restraints Control Module (RCM) | The RCM is not receiving Roll Stability Control (RSC®) messages from the ABS module. CLEAR the DTC. REPEAT the network test with the scan tool. If the ABS module does not pass the network test, GO to PINPOINT TEST B . |
| U0028:88 | Vehicle Communication Bus A: Bus Off | RCM | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U0100 | Lost Communication with ECM/PCM | 4X4 control module ABS module Battery Control Module - High Voltage Traction Battery (BCM-HVTB) Instrument Cluster (IC) Power Steering Control Module (PSCM) TCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST A . |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | ABS module (hybrid) Accessory Protocol Interface Module (APIM) Air Conditioning Compressor Module (ACCM) RCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST A . |
| U0101 | Lost Communication with TCM | Battery Control Module - High Voltage Traction Battery (BCM-HVTB) (hybrid) IC (hybrid) PCM (hybrid) PSCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST H . |
| U0111 | Lost Communication with Battery Energy Control Module | IC (hybrid) PCM (hybrid) TCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST I . |
| U0114 | Lost Communication With Four-Wheel Drive Clutch Control Module | ABS module IC | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST D . |
| U0114:00 | Lost Communication With Four-Wheel Drive Clutch Control Module: No Sub Type Information | ABS module | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST D . |
| U0121 | Lost Communication with Anti-Lock Brake System (ABS) Control Module | 4X4 control module IC PSCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST B . |
| U0129 | Lost Communication with Brake System Control Module | IC (hybrid) PCM TCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST B . |
| U0131 | Lost Communication With Power Steering Control Module (PSCM) | IC | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST G . |
| U0131:87 | Lost Communication With Power Steering Control Module (PSCM): Missing Message | ABS module | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST G . |
| U0140 | Lost Communication with Body Control Module (GEM) | Audio Control Module (ACM) Front Controls Interface Module (FCIM) Front Display Interface Module (FDIM) HVAC module IC | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST Q . |
| U0140:00 | Lost Communication with Body Control Module: No Sub Type Information | ACM APIM FCIM GPSM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST Q . |
| U0151 | Lost Communication with Restraints Control Module | ABS module IC Occupant Classification System Module (OCSM) | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST E . |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | APIM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST E . |
| U0151:87 | Lost Communication with Restraints Control Module: Missing Message | ABS module | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST E . |
| U0151:88 | Lost Communication with Restraints Control Module: Bus Off | ABS module | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U0154:00 | Lost Communication with Restraints Occupant Classification System Module: No Sub Type Information | RCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST F . |
| U0155 | Lost Communication with Instrument Panel Cluster (IC) Control Module | 4X4 control module ABS module ACM BCM-HVTB FDIM HVAC module PSCM Smart Junction Box (SJB) | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST C . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | ACCM ACM APIM GPSM RCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST C . |
| U0155:87 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: Missing Message | ABS module | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST C . |
| U0159 | Lost Communication with Parking Assist Control Module (PAM) | ACM IC PSCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST J . |
| U0159:00 | Lost Communication with Parking Assist Control Module "A": No Sub Type Information | ACM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST J . |
| U0162:00 | Lost Communication with Navigation Display Module: No Sub Type Information | ACM | REFER to INFORMATION AND ENTERTAINMENT SYSTEMS article. |
| U0163 | Lost Communication With Navigation Control Module (NAV) | IC | REFER to INFORMATION AND ENTERTAINMENT SYSTEMS article. |
| U0164 | Lost Communication With HVAC Control Module (EATC) | FDIM | IC CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST L . |
| U0164:00 | Lost Communication with HVAC Control Module: No Sub Type Information | ACM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST L . |
| U016A:00 | Lost Communication with Global Positioning System Module: No Sub Type Information | APIM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST M . |
| U0184 | Lost Communication with Radio (ACM) | FCIM FDIM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST P . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | APIM FCIM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST P . |
| U0197 | Lost Communication with Telephone Control Module | ACM FDIM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST R . |
| U0197:00 | Lost Communication with Telephone Control Module: No Sub Type Information | ACM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST R . |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | RCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST R . |
| U0255 | Lost Communication with Front Controls Interface Module | ACM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST O . |
| U0255:00 | Lost Communication with Front Display Interface Module: No Sub Type Information | ACM APIM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST N . |
| U0256 | Lost Communication with Front Display Interface Module | ACM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST N . |
| U0256:00 | Lost Communication with Front Controls Interface Module "A": No Sub Type Information | ACM APIM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST O . |
| U0294 | Lost Communication With Powertrain Control Module | TCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST A . |
| U0298:87 | Lost Communication With DC to DC Converter Control Module "A": Missing Message | ABS module | REFER to HIGH VOLTAGE CONVERTER/INVERTER article. |
| U0401 | Invalid Data Received from ECM/PCM A | 4X4 control module ABS module BCM-HVTB | RETRIEVE and FOLLOW non-network DTCs from the PCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0402 | Invalid Data Received from TCM | BCM-HVTB | RETRIEVE and FOLLOW non-network DTCs from the TCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0401:00 | Invalid Data Received from ECM/PCM: No Sub Type Information | ABS module RCM | RETRIEVE and FOLLOW non-network DTCs from the PCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0401:68 | Invalid Data Received from ECM/PCM: Event information | ACCM | RETRIEVE and FOLLOW non-network DTCs from the PCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0402 | Invalid Data Received from TCM | ABS module | RETRIEVE and FOLLOW non-network DTCs from the TCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0414 | Invalid Data Received from Four-Wheel Drive Clutch Control Module | ABS module | RETRIEVE and FOLLOW non-network DTCs from the 4X4 control module. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0415 | Invalid Data Received from Anti-Lock Brake System (ABS) Control Module | 4X4 control module PSCM | RETRIEVE and FOLLOW non-network DTCs from the ABS module. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0420:87 | Invalid Data Received From Power Steering Control Module: Missing Message | ABS module | RETRIEVE and FOLLOW non-network DTCs from the Power Steering Control Module (PSCM). REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | APIM GPSM | RETRIEVE and FOLLOW non-network DTCs from the SJB. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0422:68 | Invalid Data Received From Body Control Module: Event Information | HVAC module | RETRIEVE and FOLLOW non-network DTCs from the SJB. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0423 | Invalid Data Received From Instrument Panel Cluster (IPC) Control Module | BCM-HVTB | RETRIEVE and FOLLOW non-network DTCs from the IC. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | APIM RCM GPSM | RETRIEVE and FOLLOW non-network DTCs from the IPC. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0424 | Invalid Data Received HVAC Control Module | BCM-HVTB | RETRIEVE and FOLLOW non-network DTCs from the HVAC module. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0423:64 | Invalid Data Received from Instrument Panel Control Module: Signal Plausibility Failure | ABS module | RETRIEVE and FOLLOW non-network DTCs from the IC. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0423:68 | Invalid Data Received from Instrument Panel Control Module: Event Information | ACCM HVAC module | RETRIEVE and FOLLOW non-network DTCs from the IC. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0452 | Invalid Data Received from Restraints Control Module | ABS module | RETRIEVE and FOLLOW non-network DTCs from the RCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0452:29 | Invalid Data Received from Restraints Control Module: Signal Invalid | ABS module | RETRIEVE and FOLLOW non-network DTCs from the RCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U045A | Invalid Data Received from PAM | PSCM | RETRIEVE and FOLLOW non-network DTCs from the PAM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U046B:00 | Invalid Data Received from Global Positioning System Module: No Sub Type Information | ABS module | RETRIEVE and FOLLOW non-network DTCs from the GPSM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0485:00 | Invalid Data Received From Radio: No Sub Type Information | APIM | RETRIEVE and FOLLOW non-network DTCs from the ACM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U0554:00 | Invalid Data Received From Accessory Protocol Interface Module | RCM | RETRIEVE and FOLLOW non-network DTCs from the APIM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U1900 | CAN Communication Bus Fault - Receive Error | RCM | FOLLOW the pinpoint test for the module which failed the network test. GO to SYMPTOM CHART . |
| U2013 | Compass Module is Not Responding | IC | REFER to ELECTRONIC COMPASS article. |
| U2023 | Fault Received From External Node | IC PSCM | U2023 is set when a module receives invalid network data from another module with a faulted input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U2196 | Invalid 'Engine RPM' Data | IC | RETRIEVE and FOLLOW non-network DTCs from the PCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U2197 | Invalid 'Vehicle Speed' Data | IC | RETRIEVE and FOLLOW non-network DTCs from the PCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U2198 | Invalid 'Fuel Pulse' Data | IC | RETRIEVE and FOLLOW non-network DTCs from the PCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U2199 | Invalid 'Engine Coolant Temperature' Data | IC | RETRIEVE and FOLLOW non-network DTCs from the PCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U2200 | Invalid 'ODO Count' Data | IC | RETRIEVE and FOLLOW non-network DTCs from the PCM. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U2472 | Unexpected Ignition State | IC SJB | RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES article for a list of all DTCs. |
| U2473 | Unexpected Vehicle Speed | ACM | REFER to INFORMATION AND ENTERTAINMENT SYSTEMS article. |
| U2473 | Unexpected Vehicle Speed | SJB | REFER to MULTIFUNCTION ELECTRONIC MODULES article. |
| U2510 | CAN - Invalid Data for Vehicle Security | IC | REFER to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) article (Except Hybrid) or ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) - HYBRID article (Hybrid). |
| U2511 | CAN - Data Mis-Match (Receive Data Does Not Match Expected) | IC | REFER to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) article (Except Hybrid) or ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) - HYBRID article (Hybrid). |
| U261A | CAN Data/Configuration Setup Mismatch | IC | REFER to EXTERIOR LIGHTING article. |
| U3000:88 | Control Module: Bus Off | APIM | The module could not communicate on the network at a point in time. The fault is currently not present since the module is currently communicating with the scan tool reporting this DTC. CLEAR the DTC. REPEAT the network test with the scan tool. |