Programming the Auto-Unlock Feature Using the Keyless Entry Keypad
NOTE:
The auto-unlock feature can be enabled or disabled independently of the autolock feature.
NOTE:
The following steps must be carried out within 30 seconds or the procedure needs to be repeated. If the procedure needs to be repeated, wait 30 seconds between programming sessions.
- Enter the factory set 5 digit entry code.
- Press and hold the 3/4 button.
- While holding the 3/4 button, press and release the 7/8 button twice.
- Release the 3/4 button. The horn chirps once if auto-unlock is disabled, or chirps once followed by a honk if auto-unlock is enabled.