Component testing procedure
COMPONENTS TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Left mirror | Selector switch left | ||
| Up | 3 and 6 1 and 5 |
Up | Closed circuit |
| Down | 1 and 6 3 and 5 |
Down | Closed circuit |
| Left | 3 and 8 1 and 6 |
Left | Closed circuit |
| Right mirror | Selector switch right | ||
| Up | 1 and 2 3 and 6 |
Up | Closed circuit |
| Down | 1 and 6 2 and 3 |
Down | Closed circuit |
| Left | 1 and 6 3 and 7 |
Left | Closed circuit |
| Right | 1 and 7 3 and 6 |
Right | Closed circuit |
| Folding mirrors (if equipped) | Selector switch center | ||
| Power mirror fold in | 3 and 4 | Down | Closed circuit |
| Power mirror fold out | 1 and 4 | Up | Closed circuit |