Component testing procedure
COMPONENTS TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Forward/Rearward circuit | 3 and 4 2 and 6 |
Forward | Closed circuit |
| 4 and 6 2 and 3 |
Rearward | Closed circuit | |
| Front up/down circuit | 1 and 4 2 and 8 |
Down | Closed circuit |
| 4 and 6 1 and 2 |
Up | Closed circuit | |
| Rear up/down circuit | 4 and 5 2 and 7 |
Down | Closed circuit |
| 4 and 7 2 and 5 |
Up | Closed circuit |