LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Expedition RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever Knob >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Knob: Removal

    NOTE: Expedition selector lever shown in the illustration, Navigator similar.
    Fig 1: Locating Selector Lever Trim Ring
    G06127819Courtesy of FORD MOTOR CO.
  1. Remove the selector lever trim ring, console tray and cup holder insert.
  2. Remove the screw and the console upper trim.
    Fig 2: Locating Console Upper Trim Screw
    G06127820Courtesy of FORD MOTOR CO.
  3. Remove and discard the RH selector lever knob cover.
    1. Start at the bottom front only.
    2. Move towards the top front and remove the cover.
      Fig 3: Removing Discard RH Selector Lever Knob Cover
      G06127920Courtesy of FORD MOTOR CO.
  4. Remove and discard the LH selector lever knob cover.
    1. Start at the bottom front only.
    2. Move towards the top front and remove the cover.
      Fig 4: Removing LH Selector Lever Knob Cover
      G06127921Courtesy of FORD MOTOR CO.
  5. Remove and discard the RH selector lever knob screw.
    Fig 5: Locating RH Selector Lever Knob Screw
    G06127922Courtesy of FORD MOTOR CO.
    6. NOTE: Verify the LH and RH knob body towers are present and not damaged.
    Fig 6: Locating LH Selector Lever Knob Screw
    G06127926Courtesy of FORD MOTOR CO.
  6. Remove and discard the LH selector lever knob screw.
  7. Disconnect the tow/haul switch electrical connector and remove the selector lever knob.
    Fig 7: Locating Tow/Haul Switch Electrical Connector
    G06127924Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals