LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems - With Intelligent Access >> General Procedures >> Autolock Programming >> Programming the Autolock Feature Using the Message Center
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming the Autolock Feature Using the Message Center

  1. With all the vehicle doors closed, place the ignition in the ON mode.
  2. NOTE: Refer to the Owner's Literature a complete list of the message center menus.

    Access the locks menu within the setup menu in the message center.

  3. Select autolock and use the left and right arrows to enable or disable the feature.