LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> General Information >> DTC Index >> Information And Entertainment Systems DTCS >> Premium >> FCIM - Premium
April 5, 2026: LEMON Manuals is launched! Read the announcement.

FCIM - Premium

DTC Description Action
B00D5:01 Restraint System Passenger Disable Indicator: General Electrical Failure CLEAR the DTCs  . WAIT 10 seconds. REPEAT the self-test. If DTC  B00D5:01 is still present, INSTALL a new FCIM  . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) .
B113C:11 Hazard Switch Illumination: Circuit Short To Ground CLEAR the DTCs  . WAIT 10 seconds. REPEAT the self-test. If DTC  B113C:11 is still present, INSTALL a new FCIM  . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) .
B1202:01 Restraint System Passenger Enable Indicator: General Electrical Failure CLEAR the DTCs  . WAIT 10 seconds. REPEAT the self-test. If DTC  B1202:01 is still present, INSTALL a new FCIM  . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U0155:00 Lost Communication With IPC  Module: No Sub Type Information GO to PINPOINT TEST Y .
U0257:00 Lost Communication With Front Controls / Display Interface Module: No Sub Type Information GO to PINPOINT TEST AC .
U0423:00 Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information REFER to INFORMATION CENTER - INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES to RETRIEVE and FOLLOW DTCs  present in the IPC  .
U2013:63 Switch Pack: Circuit / Component Protection Time-Out GO to PINPOINT TEST U .
U201A:51 Control Module Main Calibration Data: Not Programmed
  • This DTC sets due to incomplete or incorrect PMI  procedures. CHECK the vehicle service history for recent service actions related to the FCIM  .
  • If there have been recent service actions with the FCIM  , REPEAT/PERFORM the PMI  procedure as directed by the diagnostic scan tool. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
  • If there have been no recent service actions, INSTALL a new FCIM  to correct the failure to retain configuration data. REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3000:41 Control Module: General Checksum Failure CLEAR the DTCs  . WAIT 10 seconds. REPEAT the self-test. If DTC  U3000:41 is still present, INSTALL a new FCIM  . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3000:42 Control Module: General Memory Failure CLEAR the DTCs  . WAIT 10 seconds. REPEAT the self-test. If DTC  U3000:42 is still present, INSTALL a new FCIM  . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AD .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AE .
scientia non olet · About LEMON Manuals