6F50 And 6F55
AUTOMATIC TRANSMISSION (6F50/6F55) DTC CHART
| DTC | Description | Action |
|---|---|---|
| P0657 | Actuator Supply Voltage "A" Circuit/Open | Power to all solenoids has been interrupted, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST F . |
| P0701 | Transmission Control System Range/Performance | DTCs P2700, P2701, P2702, P2703 and/or P2704 may set. CLEAR the DTCs. If the DTC returns, GO to SYMPTOM CHART . |
| P0702 | Transmission Control System Electrical | This DTC sets with P0882 (system voltage low) or P0883 (system voltage high). INSPECT the PCM connectors for damaged or pushed-out terminals, corrosion or loose wires. INSPECT all grounds are secure. REFER to SYMPTOM CHART: CHARGING SYSTEM . |
| P0706 | Transmission Range Sensor "A" Circuit Range/Performance | This DTC sets with P1702 and P1921. Engine may not crank, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J . |
| P0707 | Transmission Range Sensor "A" Circuit Low | This DTC sets with P1702 and P1921. Engine may not crank, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J . |
| P0708 | Transmission Range Sensor "A" Circuit High | This DTC sets with P1702 and P1921. Engine may not crank, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J . |
| P0710 | TFT Sensor "A" Circuit | This DTC sets with P0711 and P0712. P0713 may set. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST G . |
| P0711 | Transmission Fluid Temperature Sensor "A" Circuit | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST G . |
| P0712 | Transmission Fluid Temperature Sensor "A" Circuit Low | This DTC sets with P0710. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST G . |
| P0713 | Transmission Fluid Temperature Sensor "A" Circuit High | This DTC sets with P0710. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST G . |
| P0715 | Turbine/Input Shaft Speed Sensor "A" Circuit | This DTC sets with P0717. GO to PINPOINT TEST K . |
| P0717 | Turbine/Input Shaft Speed Sensor "A" Circuit No Signal | This DTC sets with P0715. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST K . |
| P0718 | Turbine/Input Shaft Speed Sensor "A" Circuit Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST K . |
| P0720 | Output Shaft Speed Sensor Circuit | This DTC sets with P0722. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST L . |
| P0721 | Output Shaft Speed Sensor Circuit Range/Performance | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST L . |
| P0722 | Output Shaft Speed Sensor Circuit No Signal | This DTC sets with P0720. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST L . |
| P0729 | Gear 6 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0731 | Gear 1 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0732 | Gear 2 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0733 | Gear 3 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0734 | Gear 4 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0735 | Gear 5 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0740 | Torque Converter Clutch Solenoid Circuit/Open | DTC P0743 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H . |
| P0741 | Torque Converter Clutch Solenoid Circuit Performance/Stuck Off | This DTC sets with P0748. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0742 | Torque Converter Clutch Solenoid Circuit Stuck On | This DTC sets with P0743. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H . |
| P0743 | Torque Converter Clutch Solenoid Circuit Electrical | This DTC sets with P0740, P0742 and P0744. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H . |
| P0744 | Torque Converter Clutch Solenoid Circuit Intermittent | This DTC sets with P0743. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H . |
| P0748 | Pressure Control Solenoid "A" Electrical | This DTC sets with P0750, P0751 and P0752. Service P0960, P0962 and/or P0963 first. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I . |
| P0750 | Shift Solenoid "A" | This DTC sets with P0751. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A . |
| P0751 | Shift Solenoid "A" Performance/Stuck Off | This DTC sets with P2700. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0752 | Shift Solenoid "A" Stuck On | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0753 | Shift Solenoid "A" Electrical | This DTC sets with P0752, P0754 and P0755. Service P0750, P0973 and P0974 first. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A . |
| P0754 | Shift Solenoid "A" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A . |
| P0755 | Shift Solenoid "B" | This DTC sets with P0756. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B . |
| P0756 | Shift Solenoid "B" Performance/Stuck Off | This DTC sets with P2701. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0757 | Shift Solenoid "B" Stuck On | This DTC sets with P2701. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0758 | Shift Solenoid "B" Electrical | This DTC sets with P0755, P0976 and P0977. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B . |
| P0759 | Shift Solenoid "B" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B . |
| P0760 | Shift Solenoid "C" | This DTC sets with P0761. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C . |
| P0761 | Shift Solenoid "C" Performance/Stuck Off | This DTC sets with P2702. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0762 | Shift Solenoid "C" Stuck On | This DTC sets with P0763. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0763 | Shift Solenoid "C" Electrical | This DTC sets with P0760, P0979 and P0980. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C . |
| P0764 | Shift Solenoid "C" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C . |
| P0765 | Shift Solenoid "D" | This DTC sets with P0766. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D . |
| P0766 | Shift Solenoid "D" Performance/Stuck Off | This DTC sets with P2704. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0767 | Shift Solenoid "D" Stuck On | This DTC sets with P07A9 and P2704. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0768 | Shift Solenoid "D" Electrical | This DTC sets with P0767, P0769 and P0770. Service P0765, P0982 and P0983 first. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D . |
| P0769 | Shift Solenoid "D" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D . |
| P0770 | Shift Solenoid "E" | This DTC sets with P0773. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST E . |
| P0771 | Shift Solenoid "E" Performance/Stuck Off | This DTC sets with P0984. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0772 | Shift Solenoid "E" Stuck On | This DTC sets with P0984. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0773 | Shift Solenoid "E" Electrical | This DTC sets with P0770. GO to PINPOINT TEST E . |
| P0774 | Shift Solenoid "E" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST E . |
| P07A5 | Transmission Friction Element "B" Stuck On | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P07A8 | Transmission Friction Element "D" Performance/Stuck Off | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P07A9 | Transmission Friction Element "D" Stuck On | This DTC sets with P0767. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P07AA | Transmission Friction Element "E" Performance/Stuck Off | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0815 | Upshift Switch Circuit | REFER to AUTOMATIC TRANSMISSION EXTERNAL CONTROL - SELECT SHIFT . |
| P0816 | Downshift Switch Circuit | REFER to AUTOMATIC TRANSMISSION EXTERNAL CONTROL - SELECT SHIFT . |
| P0867 | Transmission Fluid Pressure | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0960 | Pressure Control Solenoid "A" Control Circuit/Open | This DTC sets with P0748. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I . |
| P0961 | Pressure Control Solenoid "A" Control Circuit Range/Performance | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I . |
| P0962 | Pressure Control Solenoid "A" Control Circuit Low | This DTC sets with P0748. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I . |
| P0963 | Pressure Control Solenoid "A" Control Circuit High | This DTC sets with P0748. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I . |
| P0973 | Shift Solenoid "A" Control Circuit Low | This DTC sets with P0753. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A . |
| P0974 | Shift Solenoid "A" Control Circuit High | This DTC sets with P0753. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A . |
| P0976 | Shift Solenoid "B" Control Circuit Low | This DTC sets with P0758. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B . |
| P0977 | Shift Solenoid "B" Control Circuit High | This DTC sets with P0758. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B . |
| P0979 | Shift Solenoid "C" Control Circuit Low | This DTC sets with P0763. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C . |
| P0980 | Shift Solenoid "C" Control Circuit | High This DTC sets with P0763. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C . |
| P0982 | Shift Solenoid "D" Control Circuit Low | This DTC sets with P0768. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D . |
| P0983 | Shift Solenoid "D" Control Circuit High | This DTC sets with P0768. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D . |
| P0984 | Shift Solenoid "E" Control Circuit Range/Performance | This DTC sets with P0771 and P0772. CLEAR the DTC. If the DTCs returns, GO to SYMPTOM CHART . |
| P1001 | KOER Not Able to Complete, KOER Aborted | RETRIEVE and RECORD all DTCs. REPAIR any self-test or CMDTCs first. CLEAR the DTC. If the DTC returns, REPROGRAM the original PCM to the latest calibration. If the DTCs return, INSTALL a new PCM. REFER to appropriate REMOVAL AND INSTALLATION procedure. After installing the new PCM, PROGRAM it with the latest calibration and PERFORM the Solenoid Body Strategy Download . REFER to SOLENOID BODY STRATEGY DOWNLOAD . |
| P1397 | System Voltage Out Of Self Test Range | INSPECT the PCM power and ground circuits for opens or short to ground. INSPECT the PCM connector for damaged or pushed-out terminals, corrosion or loose wires. CLEAR the DTC. RERUN the KOEO and KOER self-test. If the DTC returns, REFER to SYMPTOM CHART: CHARGING SYSTEM . |
| P1501 | Vehicle Speed Sensor Out Of Self Test Range | CLEAR the DTC. If the DTC returns, PLACE selector lever in park and monitor the VSS PID. VERIFY the VSS input is at 0. RERUN self-test procedure. If the DTC returns, REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL . |
| P1502 | Vehicle Speed Sensor Intermittent | CLEAR the DTC. If the DTC returns, PLACE selector lever in park and monitor the VSS PID. VERIFY the VSS input is at 0. RERUN self-test procedure. If the DTC returns, REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL . |
| P1636 | Inductive Signature Chip Communication Error | CLEAR the DTC. If the DTC returns, INSTALL a new PCM. REFER to DTC CHART: POWERTRAIN CONTROL MODULE (PCM) . After installing the new PCM, PERFORM the Solenoid Body Strategy Data Download. REFER to SOLENOID BODY STRATEGY DOWNLOAD . |
| P163E | Transmission Control Module Programming Error | CLEAR the DTC. If the DTC returns, REPROGRAM the PCM to the latest calibration. If the DTC returns, INSTALL a new PCM. REFER to appropriate REMOVAL AND INSTALLATION procedure. After installing a new PCM, PERFORM the Solenoid Body Strategy Data Download. REFER to SOLENOID BODY STRATEGY DOWNLOAD . |
| P163F | Transmission ID Block Corrupted, Not Programmed | CLEAR the DTC. If the DTC returns, REPROGRAM the PCM to the latest calibration. If the DTC returns, INSTALL a new PCM. REFER to appropriate REMOVAL AND INSTALLATION procedure. After installing a new PCM, PERFORM the Solenoid Body Strategy Data Download. REFER to SOLENOID BODY STRATEGY DOWNLOAD . |
| P1702 | Transmission Range Sensor Circuit Intermittent | This DTC sets with P0706, P0707 and P0708. CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J . |
| P1705 | Transmission Range Circuit Not Indicating Park/Neutral During Self Test | CLEAR the DTC. RERUN the KOEO and KOER self-test. |
| P1711 | Transmission Fluid Temperature Sensor Out Of Self Test Range | CLEAR the DTC. RERUN the KOEO and KOER self-test. |
| P1744 | Torque Converter Clutch Solenoid Circuit Performance | This DTC sets with P0741 and P2758. P1744 is a non-electrical DTC. CLEAR the DTC. If the DTCs returns, GO to SYMPTOM CHART . |
| P1783 | Transmission Overtemperature Condition | MONITOR the TFT sensor PID and TCC PID to VERIFY and MONITOR transmission fluid temperature and TCC solenoid electrical operation. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P1910 | Reverse Lamp Control Circuit/Open | CLEAR the DTC. If the DTC returns, REFER to EXTERIOR LIGHTING SYSTEM . |
| P1921 | Transmission Range Signal | Engine may not crank. This DTC sets with P0706, P0707 and P0708. CLEAR the DTC. If the DTC returns, REPAIR the more specific DTC first. GO to PINPOINT TEST J . |
| P2700 | Transmission Friction Element "A" Apply Time Range/Performance | DTC P2700 is a non-electrical DTC. This DTC sets with P0751 and P0752. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART |
| P2701 | Transmission Friction Element "B" Apply Time Range/Performance | DTC P2701 is a non-electrical DTC. This DTC sets with P0756 and P0757. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2702 | Transmission Friction Element "C" Apply Time Range/Performance | DTC P2702 is a non-electrical DTC. This DTC sets with P0761 and P0762. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2703 | Transmission Friction Element "D" Apply Time Range/Performance | DTC P2703 is a non-electrical DTC. This DTC sets with P0766 and P2704. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2704 | Transmission Friction Element "E" Apply Time Range/Performance | DTC P2704 is a non-electrical DTC. This DTC sets with P0766, P0767 and P2703. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2705 | Transmission Friction Element "F" Apply Time Range/Performance | DTC P2705 is a non-electrical DTC. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2758 | Torque Converter Clutch Pressure Control Solenoid Stuck On | DTC P2758 is a non-electrical DTC. This DTC sets with P1744. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2760 | Torque Converter Clutch Pressure Control Solenoid Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H . |
| P2783 | Torque Converter Temperature Too High | TCC control valve stuck in the apply position. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |