High Pressure Fuel Contamination System Kit: Replace
WARNING: This page is about the F450 Super Duty 2D Cab Chassis, 6.7L Eng VIN T, 4WD, which is a different variant/trim than selected.
FUEL INJECTION - DIESEL
Includes: Replace the High Pressure Pump, Fuel Rails, all Injectors and Engine Fuel Lines as instructed from the manufacturers service bulletin. For additional component replacement refer to combinations.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 11.9 | B | |||
| Additional Procedure: HIGH PRESSURE FUEL CONTAMINATION SYSTEM KIT: Replace: | ||||
| w/Skid Plate | 0.2 | B | ||
| Combination Procedure: FUEL CONDITIONING MODULE: Remove & Replace: | ||||
| 0.8 | B | |||
| Combination Procedure: FUEL COOLER: Remove & Replace: | ||||
| 0.7 | B | |||
| Combination Procedure: FUEL FILTER: Remove & Replace: | ||||
| Both | 0.7 | B | ||
| Combination Procedure: FUEL LINES: Flush: | ||||
| 0.7 | D | |||
| Combination Procedure: FUEL TANK: Clean: | ||||
| Includes: R&I Fuel Tank. | 3.4 | C | ||
| Combination Procedure: FUEL TANK FILLER PIPE: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: FUEL TANK SELECT VALVE: Remove & Replace: | ||||
| 0.3 | B | |||