LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Fiesta S, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Removal And Installation >> Generator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Generator: Installation

  1. Install the generator and generator upper and lower bolts. Hand-tighten the bolts. Do not torque the bolt at this time.
  2. Install the generator stud bolt.
    • Tighten to 10 Nm (89 lb-in).
  3. Install the generator nut.
    • Tighten to 48 Nm (35 lb-ft).
  4. Tighten the generator upper and lower bolts.
    • Tighten to 48 Nm (35 lb-ft).
  5. Attach the upper degas bottle hose to the fuel rail.
  6. Connect the generator electrical connector.
  7. Position the generator B+ terminal on the generator and install the nut.
    • Tighten the nut to 15 Nm (133 lb-in).
    • Install the generator B+ terminal protective cover.
  8. Install the accessory drive belt. For additional information, refer to ACCESSORY DRIVE .
  9. Connect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
scientia non olet · About LEMON Manuals