Camber Adjustment - Rear

Camber Adjustment - Rear

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

General Procedure

1. Using alignment equipment and the manufacturer's instructions, measure the rear camber.

2. NOTE: If the rear camber is below the minimum specification, the camber can be adjusted +1.0 degree by replacing the upper arm with an upper arm repair kit.
Replace the upper arm with the +1.0 degree camber upper arm repair kit. REFER to Upper Arm .

3. Recheck alignment to verify camber change and adjust the toe if necessary. REFER to Toe Adjustment - Rear .