LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Acceleration Control System >> Diagnosis And Testing >> Accelerator Pedal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal: Removal

    NOTE: To prevent setting DTCs, make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connectors.
  1. Disconnect the accelerator pedal sensor electrical connector.
  2. Remove the 3 nuts and the accelerator pedal and sensor assembly.