LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Taurus Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3473 (Seating System - Component Testing, General Procedures, Removal And Installation, Disassembly And Assembly) >> Removal And Installation >> Heated Seat Module Second Row >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row  in this service information.

  1. 1.

    On the second row 40 percent seat cushion, separate the strut and disengage the cushion cover J-clip.
    • At installation, make sure the lower anchor and tether for children wires at the rear of the cushion frame are positioned through the cushion cover and accessible for use after installation.
GFD95617Courtesy of FORD MOTOR COMPANY

  1. 2.

    Disengage the cushion cover J-clip at the rear attached to the cushion frame and open the flap.

  1. 3.

    Disconnect the electrical connectors, remove the screw and the heated seat module.

  1. 4.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals